Table of Contents
Advertisement
-.-
-
---.--
Adjusting
the oven temperature
control
Oven temperature
controls will gradually
shift after years of use. So, even though
your new oven is properly adjusted to
provide accurate temperatures,
it may cook
faster or slower than your old oven.
If, after using the oven for a period of time,
you are not satisfied with the temperature
settings, you can change them by following
these steps:
1. Make sure the Oven Temperature
Control Knob is turned to the off position.
Pull knob straight off and flip it over.
2. Loosen the locking screws inside the
control knob. Note the position
of the
notches.
3. To lower the temperature,
hoM knob
handle firmly and move the tooth a notch
counterclockwise.
Each notch equals
about 5°F (2.5%).
4. To raise the temperature,
hold knob
handle firmly and move the tooth a notch
clockwise. Each notch equals about 5°F
(2.5%).
5. Tighten
the locking screws and replace
the control knob.
Locking
screws.
No&her
To&h
13
Advertisement
Table of Contents
