Correct Operation Of The Machine; Cleaning Filters; Checking Of Progress Speed; Checking Of The Gearbox Oil Level - BARGAM AT Biturbo Series Maintenance & Operation Manual

4.7.10 ELECTRIC SPRAYER:
Are of our production and suggested to replace the booms and the lances. For their use
we recommend to carefully read the user's manual provided with the electric sprayer.
5 CORRECT OPERATION ON THE MACHINE
5.1

CLEANING FILTERS

The filters are an essential part of the sprayer, as they are able to stop particles that could
damage the pump and/ or settled in the latter valves. Frequently clean the suction filter
after each treatment and the high pressure filter every four treatment .(§7.7)
5.2

CHECKING OF PROGRESS SPEED

The forward speed of the tractor must always be kept under control during treatment,
because the volume of product dispensed per hectare depends from it.
5.3 OPERATE IN THE CORRECT ENVIRONMENTAL CONDITIONS
The fundamental rule is to operate in the correct environmental conditions to avoid losses
to derive and evaporation:
Wind not exceeding 5 km/h
Light breeze
Too high Temperatures
Right humidity level (not low)
5.4

CHECKING OF THE GEARBOX OIL LEVEL

Check regularly the oil on the gearbox. Follow the procedure as specified in the
maintenance paragraph .(§7.3)
5.5

CHECKING OF THE RESERVOIR LEVEL

Verify that the water tank for hand washing and maintenance are filled with clean water
before start up any treatment
5.6 CHECKING OF THE PRESSURE GAUGE
Verify the operation of the pressure gauge on the control unit, since from the right
pressure on hydraulic circuit depends the flow rate of the nozzle and the quality of delivery.
42