Main Tank; Hand-Washing Tank - BARGAM AT Biturbo Series Maintenance & Operation Manual

Do not use the machine when tired, ill or under the influence of medication, drugs or
alcohol..
Before using the machine it is necessary to learn the layout of controls and operation..
Pay attention to the risk of unintentional contact of parts of the machine with the high
voltage airlines.
4.1 PLUMBING

4.1.1 MAIN TANK

The main tank has various capacities. To fill the water tank use only indirectly open
waters or just free-fall from water conductor.
You can fill the tank through the pump using the pick-up filter (p. 4.1.4)
The tank is equipped with a graduated band that brings transparency to the exact
quantity of liquid inside. The detection has to be made in flat area .
All filling systems provided by BARGAM S.P.A. are preventing pollution and
regurgitation of liquid inside the tank
4.1.2 WASHING- SYSTEM CIRCUIT TANK
All mounted and trailed sprayers are equipped as per CE directive n° 2004/108 of
circuit-washing tank to cleaning the whole machine (suction pump delivery, nozzles).
The tank must be filled only by clean water.
To use the circuit-washing tank for cleaning it is enough to turn the 3-way gate valve on
CIRCUIT-WASHING TANK position and operate the pump for 10 min.
When done, it's necessary to eliminate waste in defined places where they cannot
cause harm to people or to the environment.
Use different active ingredients on various crops to avoid damage .We recommend to
add to each washing liquid 2 kg of soda for every 100 liters of water.

4.1.3 HAND-WASHING TANK

For the cleaning of the operator, when using the machine or when it is necessary, is
installed a tank of variable capacity according to the main tank. The clean water tank
for hand washing has to be filled only by clean water.
Do not drink for any reason the liquid inside!
20