Page 1
® INSTALLATION INSTRUCTIONS LAVATORY FAUCETS FOUR-INCH CENTERSET MEASUREMENTS Fits 4" centers and through a 1" minimum diameter hole. ALL MODELS EQUIPPED WITH A MOEN FLOW-RATOR™. 6" X 2" WIDE 1-3/4" MAX. USE SPACER TO INSTALL ON THINNER LAVATORY 4-3/4"...
Page 2
Installation Be sure lavatory or mounting surface is clean and dry. Place a bead of plumber's putty HOLD WITH around the inside lip of the gasket, position gasket on deck. Assemble clamp bars, WRENCH spacers if needed, and mounting nuts to escutcheon studs. Tilt clamp bars back as TAILPIECE shown in illustration, then place faucet supplies and studs down through the deck.
Page 3
Slide off grooved sleeve and spacer. Using the cartridge twisting tool (furnished with new Moen cartridge) and pliers turn the cartridge back and forth between 11 and 1 o'clock, then grasp the cartridge stem and pull out the cartridge. If the cartridge is difficult to remove use a Moen cartridge puller.