Table of Contents
Advertisement
Solid Element Surface Units
2.
For best results, wipe off surface
units with a damp
soft cloth and
soapy
water after each use. Burned-
on food may be removed
with a
soapy
scouring
pad. The red spot in
the center of the surface unit will
gradually
wash off. This is normal
and will not affect the operation
of
the surface unit.
3. IMPORTANT: After cleaning,
apply
a thin coat of salt-free oil to the
CCCL surface units, then heat 3-5
minutes. Oil may smoke slightly
when heated.
If surface units have
dark spots caused
by grease
and
food, the oil treatment
will improve
their appearance
but not eliminate
the spots. NOTE: Optional
Elec-
trol dressing
can be applled
to
the surface
unlts to Improve
their appearance.
4. The stainless steel trim rings will
gradually
yellow
from the heat of
the surface units and pans. This is
normal. The yellowing
can be
removed
by using stainless steel
cleaner
or Cook Top Polishing
Creme on the trim rings.
To obtain
order information
for Cook Top Polishing Creme
(PN 814009) or Electrol dressing
(PN 814030), write to:
Whirlpool
Corporation
Attention:
Customer
Service
Dept.
1900 Whirlpool
Drive
LaPorte, IN 46350s
Advertisement
Table of Contents
