The Anti-Tip Bracket; Optional Door Panel Pat - Whirlpool RF362BBD Use And Care Manual

The anti-tip bracket
The range will not tip during normal use. However, tipping can occur if you apply too much
force or weight to the open door without the anti-tip bracket properly secured.
Personal injury Hazard
*To reduce risk of range tipping over, secure range with a properly
installed anti-tip bracket supplied with range or an optional floor-
mounted anti-tip bracket kit.
l
If range is moved for cleaning or service, check that anti-tip bracket
is engaged before using range.
Failure to follow the above precautions could result in personal injury.
To verify the anti-tip bracket
is engaged (if you have a floor
brat ket):
l
Remove
the storage drawer. (See page
21.)
Rear
leveling
leg
Floor bracket
l
Look
to see if the anti-tip bracket is
attached to floor with screws.
l
Make sure
one rear leveling leg is
positioned under the anti-tip bracket.
l
See Installation Instructions for further
details.
To verify the anti-tip bracket
is engaged (if you have a wall
bracket):
Cable
(attached
to rear of
control
panel)
Wall bracket
l
Look
to see if the anti-tip bracket is
attached with screws to the wall behind
the control panel.
l
Make sure
the cable on the back of the
range is secured by the two hooks on the
bracket.
l
Cable
must be unhooked from wall brack-
et to move range for cleaning or service.
Reconnect cable before using range.
l
See Installation Instructions for further
details.
Optional door panel pat
If you would like to change the color of your
oven door glass to white or almond, you can
order one of these kiis from your Whirlpool
Dealer. The kiis include easy installation
instructions.
Models RF375PXD and RF370PXD:
l
White (Kii No. 814324)
l
Almond
(Kit No. 814325)
Model RF362BBD:
l
White
(Kit No.
814071)
l
Almond
(Kit No. 814072)
22