Introduction; Playable Ipod Models - JVC TH-LB2-B Instructions Manual

Introduction

Auto power save function
When no operation is done in certain situations for 29 minutes,
the unit turns off automatically. This function is on at the initial
setting. For details, refer to "Operations."
In this manual, the remote control buttons are used for
explaining the operations unless mentioned otherwise.
However, if the System has the same or similar button names,
they can also be used for the operations.

Playable iPod models

• Compatible iPod:
Made for
iPod nano (6th generation)
iPod nano (5th generation)
iPod nano (4th generation)
iPod nano (3rd generation)
iPod nano (2nd generation)
iPod touch (4th generation)
iPod touch (3rd generation)
iPod touch (2nd generation)
iPod touch
iPod classic
iPhone 4S
iPhone 4
iPhone 3GS
iPhone 3G
*
Only for still picture
• Also refer to the instruction manual for iPod.
•
If incompatible iPod is connected, NOT SUPPORT is shown on
the display.
• If iPod does not play correctly, update iPod software to the latest
version.
•
For details about updating iPod, check on the Apple web site
<http://www.apple.com/>.
•
For the latest information on compatible iPod models, check on
our web site.
In this manual, "iPod" refers to iPod, iPod touch and iPhone
devices. When iPod touch or iPhone device is referred to
directly, "iPod touch" or "iPhone" is used.
Important cautions
Installation of the System
• Select a place which is level, dry, and neither too hot nor too cold;
between 5°C and 35°C.
• Leave sufficient distance between the System and the TV.
• Do not use the System in a location near heat sources, or in a
place subject to direct sunlight, excessive dust, or vibration.
• Install the System in a location with adequate ventilation to
prevent internal heat buildup.
Power cord
•
Do not handle the power cord with wet hands.
• A small amount of power is always consumed while the power
Audio Video
cord is connected to the wall outlet.
*
•
Do not pull on the cord to unplug the power cord. When
unplugging the power cord, always grasp and pull the plug so as
not to damage the cord.
To prevent malfunctions of the System
–
•
There are no user-serviceable parts inside. If anything goes
wrong, unplug the power cord and consult your dealer.
• Do not insert any metallic objects or liquids into the System.
Safety precautions
Avoid moisture, water, and dust
Do not place the System in moist or dusty places.
Avoid high temperatures
Do not expose the System to direct sunlight and do not place it near
any heating devices.
When you are away
When away on holiday or for other reasons for an extended period
of time, disconnect the power cord from the wall outlet.
Do not block the vents
Blocking the vents may damage the System.
Care of the cabinet
• Stains on the System should be wiped off with a soft cloth. If the
System is heavily stained, wipe it with a cloth soaked in water
diluted neutral detergent and wrung well, then wipe clean with
a dry cloth.
•
Since the System may deteriorate in quality, become damaged or
get its paint peeled off, be careful about the following:
–
–
–
–
1
Notes on handling
DO NOT wipe it forcefully.
DO NOT wipe it with thinners, benzines or other organic
solvents including disinfectants.
DO NOT apply any volatile substances such as insecticides to it.
DO NOT allow any rubber or plastic to remain in contact with
it for a long time.