Tones; Baking/Roasting; To Choose Between High And Low Volume Tones - Whirlpool GR395LXG Use & Care Manual

USING YOUR RANGE
T
ONES
Tones tell you if a function is entered correctly or
not. They also tell you when a cycle is completed.
To shut off all tones except for the end-of-timer
and error tones:
Press and hold STOP TIME for 5 seconds.
A short tone will sound to tell you the
tones have been changed. Repeat to turn
STOP
the tones back on. You will see "oFF" for
TIME
3 seconds when the tones are turned off
and "on" for 3 seconds when they are
turned on.
B /
AKING ROASTING
Your oven is designed with the ACCUBAKE
temperature management system to constantly
monitor oven temperature. The bake element
will cycle, as needed, to maintain the desired
temperature. This feature is automatically
activated when the oven is in operation.
1.
Place the racks where you need them.
For more information, see "Positioning racks and
pans" in "Using the oven" earlier in this section.
IMPORTANT: Never place food or cookware
directly on the oven door or the oven bottom.
2.
Choose the bake setting (optional).
3.
Set the temperature (optional).
Do this step if you want to set a temperature
other than 350°F. Press
temperature or
5°F amounts. Use these pads until the desired
temperature shows on the small display.
18 18
®
to raise the
to lower the temperature in

To choose between high and low volume tones:

Press and hold DELAY START TIME for 5 seconds. A
short tone will sound to tell you the tones
have been changed. Either "HI" or "LO" will
DELAY
appear on the time display for 3 seconds to
START
TIME
show the volume you chose.
Front of rack
Rear of rack
PRESS YOU SEE
BAKE
PRESS YOU SEE
TEMP
(example for bake at 375°F)
F
BAKE
F
BAKE