Dell Precision Tower 3630 Installation Manual page 4

The cable cover for Precision Tower 3630 helps protect ports and cables connected to the system.
Follow these steps to install the cable cover on the system chassis.
NOTE: Images shown below are for representation only and may vary depending on the system's configuration.
1 Insert the tab on the security-lock metal bracket into the slot on the rear side of the system [1] and rotate to align the holes on the
metal bracket with screw holders on the chassis [2]
2 Fasten the two #6-32x1/4'' screws to secure the security metal bracket to the chassis [3].
3 Pull the cable release latch and lift the latch away from the cable cover.
4 Cable cover for Precision Tower 3630
Cable cover for Precision Tower 3630
1