Delta MultiChoice 13/14 Series Installation Instructions And Owner's Manual page 17

Valve Trim Installation
3
A.
1
3
Slide O-ring (1) over cartridge and the
bonnet nut (2). The O-ring, which acts as
a spacer to steady the sleeve, should rest
behind the bonnet nut. Slide the sleeve
(3) over the cartridge, body and O-ring.
Ensure sleeve is properly positioned over
the front of cartridge.
C.
3 2
Install volume control handle (1) with lever
to the right, using an Allen wrench (2) to
secure with the set screw (3).
2
1
17T Series Installation
B.
1
3
Escutcheon Installation for
Models T17T053, T17T253 & T17T453.
9
Secure the escutcheon (1) to the bracket
(2) with the 2 screws provided (3). Do not
overtighten escutcheon screws.
For models T17T053, T17T253 & T17T453:
Install bracket (5) over the cartridge body
using the 2 screws provided (6). Install
escutcheon (7) by placing it over the bracket
as shown and rotating it to lock the tabs (8).
Secure the escutcheon to the bracket using
set screw (9).
15
2
6
5
7
8
8