Communicating With The Host - Symbol PPT 41 Series Quick Reference

12

Communicating with the Host

Wireless communication can be performed through the
Spectrum One
PPT 4110 or the Spectrum24
installed into the PPT 4140. The terminal can also perform
communications with a host computer directly through an RS-
232 cable.
RS-232 Communications
To connect the terminal to the host for communications through
an RS-232 cable:
1. Connect the subminiature connector on the cable
(p/n 25-12059-01) to the port on the bottom of the
terminal.
Serial Port
2. Plug the DE9 connector into the host's serial
communications port. If the host computer has a 25-pin
serial connector, then an adapter cable may be required.
Quick Reference
®
PCMCIA Type II radio card installed into the
®
PCMCIA Type II radio card