13. Turn the Display back and lay it
down.
15. Extract 2 screws from the Display
hinge.
17. Extract 4 screws from the upper
case and open the external VGA
connector cover.
19. Lift off the upper case.
14. Disconnect 2 Display cables from
the system board and the 2 antenna
cables from the WLAN Card.
16. Lift the Display off the lower
assembly.
18. Disconnect the ClickPoint button
cable and the speaker cable from
the system board.
20. Disconnect the IO Board ribbon
cable, the Bluetooth ribbon cable
and the Bluetooth antenna cable.