Table of Contents
Advertisement
7.
Touch POWER to turn on washer
Slowly close the Dispense drawer. Make sure the drawer is
closed completely, then touch POWER to turn on the washer
or go to Step 8.
8.
Select CYCLE*
Turn cycle knob to select your wash cycle. See "Cycle Guide"
for details on cycle features. Press the knob for enabling the
Extra Power option.
The Extra Power option boosts stain fighting performance on
any wash cycle with a dual temperature wash, combining cold
and hot temperature during different phases of the wash time.
Press the knob to select this option.
9.
Adjust settings, if desired*
The display will show the default settings for the selected cycle.
To adjust a setting, touch its name – Temp, Spin or Soil.
Adjusting settings will change the Estimated Cycle Time.
Tightly packing the load, unbalanced loads, or excessive
suds may also cause the washer to increase the cycle time.
10.
Select any additional options*
To add an option to the cycle, touch its name – Fresh Hold,
Steam, Extra Rinse, Cycle Signal, or Control Lock.
To remove an option from the selected cycle, touch the
option again.
11.
Set a delayed wash
If you do not want to begin a cycle immediately, you may
choose the Delay Hrs. option. This will delay the start of
the wash cycle by up to 12 hours.
To set a delayed wash:
1. Touch SELECT Delay Start to set the desired delay time.
2. Touch and hold START to start the delay countdown.
The countdown stops blinking.
* Not all options and settings are available with all cycles.
See "Cycle Guide" for available options and settings.
Hide quick links:
Advertisement
Table of Contents
