Technical Support - Tesla PrimeSound HQ-220 User Manual

USB mode
1 Connect the USB flash drive to the USB port.
2 The USB port supports FAT32 format.
3 Put the MP3 files in the root folder of the USB flash drive
4 Push "1" on the remote to turn on the soundbar.
5 Push the "USB" button on the remote control to switch to USB mode.
6 Push I I buttons to select the desired track.
7 Push "VOL+" and "VOL-" buttons to adjust the volume.
Bluetooth mode
Make sure your mobile phone supports Bluetooth technology.
For more information, please refer to your mobile phone user guide.
1 When pairing with your mobile phone, keep the distance between the speaker and your mobile
phone within 1 meter.
2 Push "1" on the remote to turn on the soundbar.
3 Push the "BT" button on the remote control to select Bluetooth mode.
4 Turn on your Bluetooth mobile phone and scroll through the surrounding devices
5 After searching, select the "TESLA PrimeSound" soundbar from the list of Bluetooth devices.
6 Enter the password or PIN as: "0000" and press "Yes" to confirm.
7 After pairing successfully, select an entry from the list of Bluetooth devices and press
"Connect".
Mount the speaker on the wall
Use a spirit level to ensure that wall mount brackets on the wall are positioned horizontally.
FOLLOW US ON THE INTERNET

TECHNICAL SUPPORT

Need help with setup and operation of TESLA PrimeSound HQ-220?
Contact us: www.tesla-electronics.eu/tesla-primesound-hq-220-detail