Setting The Clock - Whirlpool RM288PXV Use & Care Manual

Setting the Clock
When the oven is first plugged in, a tone sounds and the display shows 88:88.
If the electric power ever goes off, the Display will again show all 8's when the
power comes back on.
You can cook or use the Minute Timer without setting the Clock, but the Display
will be blank after cooking.
DO THIS...
1. Touch CLOCK SET.
2. Touch Number
Pads for the right
time of day.
3.
Touch START.
THIS HAPPENS...
The Display will show a "0"
and the colon will start to
flash. The first Number Pad
must be touched wlthln
5 seconds or the Display
will go blank. Touch
CLOCK SET again and
continue.
The Display will show what
numbers you touched in
the order you touched
them. This example shows
3:25.
The colon will stop flashing.
The Clock is set.
If you have touched in an
incorrect time, such as
12:65, "Err" will show on the
Display. Touch CLOCK SET
and start over.
NOTE: To Etthe Clock, touch CLOCK SET. The current time will show on
the Display and the colon will flash. Continue to set the Clock as shown
above.