Cook/Reheat; Cook Frozen; Using Pause - Whirlpool RM288PXV Use & Care Manual

6.
Turn over or rearrange
food being defrosted.
Close door.
NOTE: Oven will
remain off until you
touch START.
m . -
7.
Touch START.
The QUICK DEFROST Indi-
cator stays on and the
Display counts down the
remaining time.
When the defrost time
ends, "End" will show on
the Display and 4 beeps
will sound. (You can stop
the beeping by opening
the door or by touching
CANCEL.] "End" will remain
on the Display and a beep
will sound every 30 sec-
onds until the door is open-
ed or CANCEL is touched.
The Display will then show
the time of day.
Adding PAUSE to the Cycle in Operation
Pause can be added to any cycle in operation as long as there is another
cycle programmed to follow. It can also be added to QUICK DEFROST or AUTO
SENSOR after START has been touched.
1. Touch PAUSE.
2. Touch START.
The oven will automatically stop after the cycle in operation to allow you to
stir, turn, or rotate food or add additional ingredients. It will stop halfway
through QUICK DEFROST to allow you to turn over or rearrange the food being
defrosted. It will stop after the first (AS] part of the AUTO SENSOR cycle to allow
you to stir, rotate or rearrange food or to add ingredients. NOTE: The oven will
remain off until you touch START.
PAUSE between (COOK) cycle and PROBE TEMP
PAUSE is automatic between COOK 1 or COOK 2 and PROBE TEMl? "PROB"
will show on the Display to remind you to plug in the probe. Touch START to
continue cooking.
Using PAUSE with AUTO SENSOR
PAUSE may be used in AUTO SENSOR with the Cook/Reheat or Cook Frozen
cycles only.
continued on next page