Setting The Controls - Whirlpool RM278BXV Use & Care Manual

Setting the Controls
1.
Set the Oven Selector and Oven
Temperature Control on CLEAN.
The Lower Oven ON Signal Light
will come on.
3. Make sure the clock is set to the
right time of day.
(See Upper
Microwave Oven Use & Care
Guide for setting instructions.]
5. Touch START. The oven will start the
Self-Cleaning cycle automati-
cally at the time you have set. The
Lower Oven LOCKED Signal Light
will come on when the oven tem-
perature exceeds normal baking
temperatures. The Lock Lever must
not be moved and the door can't
be opened when this light is on.
2. Lift the panel between the upper
and lower oven doors. Move the
Lock Lever
all the wav to the
4. Set a 2 to 4 hour Self-Cleaning
cycle. Touch START TIME Pad, then
touch the Number Pads for the
time you want to start. Touch STOP
TIME Pad, then touch the Number
Pads for the time you want to
stop.
(Option:
Only set the Stop
Time if you want the Self-Clean-
ing cycle to start immediately.]
A J-hour Self-Cleaning cycle is
recommended for moderately
soiled ovens.
l
Use 2 hours for light soil.
l
Use 3-4 hours for moderate to
heavy soil.
continued on next page