Dell Latitude C/Port II APR System Information Manual page 18

16 D e l l L a t i t u d e C / Po r t I I A P R S y s t e m I n f o r ma t i o n G u i d e
Docking for the First Time With Windows 95
Dock and turn on your computer.
1
Either press <F2> during the system boot routine, or press
2
<Fn><F1> after your computer boots to view the system setup
program.
Set Docking IRQ to Optimized.
3
Set Universal Connect to Enabled.
4
Exit the system setup program.
5
The computer automatically detects new hardware.
Click Yes at the System Settings Change window.
6
The computer restarts and automatically detects new hardware.
Click OK at the Network window.
7
Select the Identification tab at the next Network window.
8
Enter a Computer Name and Workgroup that will identify your
9
computer on the network, and click Close.
If you are unsure what Computer Name and Workgroup to enter,
check with your System Administrator.
NOTE: You must enter a Computer Name and Workgroup to proceed with the
driver installation.
The computer automatically copies files and builds a driver
information database.
Click OK at the Configuration Setup window.
10
Follow the prompts to complete the installation.
11
The Windows desktop appears and the installation is complete.
NOTE: To use the USB connectors, you must install the USB supplement from
your ResourceCD in the Win95\OSUpdate directory. If you install the USB
,
supplement your computer cannot enter suspend mode. Dell recommends that
you do not install the USB supplement unless you intend to use USB devices.