Janome MC 11000 Manual
Hide thumbs
Also See for MC 11000:
- Instructions manual (102 pages) ,
- Service manual (48 pages) ,
- Brochure (13 pages)
Advertisement
Quick Links
MC 11000
(Fig. 1)
(Fig. 1)
LCD guide shaft unit
(B)
Stopper plate
Flexible cord unit
Replacing LCD Unit (1)
(A)
(C)
(A)
(A)
LCD unit
To remove:
1 Remove the front cover.
2 Remove the printed circuit board A.
3 Remove the 4 screws (A) and remove the LCD guide
shaft unit.
4 Loosen the screw (B) with the 5.5 mm wrench and
remove the Stopper plate.
5 Loosen the 2 screws (C).
(C)
6 Remove the LCD unit.
47
Advertisement
Related Manuals for Janome MC 11000
Summary of Contents for Janome MC 11000
- Page 1 MC 11000 Replacing LCD Unit (1) (Fig. 1) To remove: 1 Remove the front cover. 2 Remove the printed circuit board A. (Fig. 1) LCD guide shaft unit 3 Remove the 4 screws (A) and remove the LCD guide shaft unit.
- Page 2 MC 11000 Replacing LCD Unit (2) LCD movabl body Pulley Belt Micro switch LCD motor Supporter plate Stopper plate LCD guide shaft unit Guide plate Micro switch Flexible cord unit To attach: Attach the LCD unit, inserting the tabs into the LCD guide slits (Fig.
- Page 3 MC 11000 Replacing LCD Unit (3) Adjusting the Microswitch Micro switch(1) LCD guide shaft unit Gear (1) Adjustment of lower stop position of LCD Match the top side of the LCD unit with the upper surface of the front cover by turnng the LCD motor gear with finger.(Fig.