Vacuuming Dry Materials - RIDGID MOB16000 Owner's Manual

16 u.s. gallon / 60 liter professional wet/dry vac
Table of Contents

Advertisement

Available languages

Available languages

SP7012 Ridgid MOB16000 ESF.qxp_SP7012 12/20/16 3:33 PM Page 12
operation (continued)
Note that the ALCI is a protective device
that may make the Vac temporarily
inoperable under some abnormal
conditions such as immersing of the base
of the Vac in water. Before any use of the
Vac involving wet pickup, or if the base
has previously been placed in standing
water or on a wet floor, the ALCI should
be tested as follows:
1. With the ALCI plugged in, press the
test button.
2. Reset button will pop up. If not, do not
use appliance.
3. Press reset button to restore power.
PUSH DOWN
TO TURN "ON"
AND "OFF"
ON/OFF
Foot Petal
WarninG: electric shock hazard
- do not place and operate vacuum
in standing water.
Familiarize yourself with the accessories
included with the Vac. Each accessory may
be used in various ways for vacuuming
and blowing debris. Here is a list of the
accessories and their uses.
utility nozzle - General purpose nozzle for
most vacuuming applications.
Wet nozzle - Used for wet pickup on
smooth surfaces to pick up liquid and dry
the surface in one stroke.
car nozzle - Dry pickup nozzle for car
interiors and most upholstery cleaning.
extension Wands - These wands can be
connected together and provides
additional length for more reach.
Dual-flex™ locking hose - Provides
transfer of vacuum or blowing capability
to work site. Provides the means of
attaching extension wands and nozzles.
crevice tool - Use to pick up debris in
hard to reach locations.
muffler/Diffuser - Use to disperse
TEST
RESET
exhaust air stream while reducing noise.
Insert into blowing port.
ALCI
Plug

vacuuming Dry materials

1. The filter must always be in correct
2. Your Wet/Dry Vac comes with the
note: A dry filter is necessary to pick
up dry material. It is not recommended
to vacuum dust when the filter is wet,
the filter will clog quickly and be difficult
to clean. Allow filter to dry before storing.
12
position to reduce the risk of leaks
and possible damage to Vac.
VF5000 Filter installed. When using
your Vac to pick up very fine dust,
it will be necessary for you to empty
the drum and clean the filter at more
frequent intervals to maintain peak
Vac performance.

Advertisement

Table of Contents
loading

Table of Contents