3. Open the latch and disconnect the power button cable from the system board.
4. Peel off the tape that secures the power button to the palm-rest and keyboard assembly.
5. Remove the screw (M2x3) that secures the power button to the palm-rest and keyboard assembly.
6. Lift the power button, along with the cable, off the palm-rest and keyboard assembly.
ការោក់ រ ៊ ូ ត ុ ង ថាមរលចូ ល ែ ិ ញ
ចំ ណា ំ
មុ ន នឹ ង លធ្វ ប្ កា រលៅខាងក្ន ុ ង កុ ំ រ ្យ ទ ទ ័ រ ររស់ អ ្ន ក សូ ម អានរ័ ត ៌ មា នសុ ែ ត្ថ ិ ភា រដែលមកពាមួ យ នឹ ង កុ ំ រ ្យ ទ ទ ័ រ ររស់ អ ្ន ក និ ង អនុ ែ តតា តា មជំ ហា ននានាលៅក្ន ុ ង
កុ ំ រ ្យ ទ ទ ័ រ ររស់ អ ្ន ក
។ សប្ មា រ់ រ ័ ត មានរដន្ថ ម សតា ី រ ី កា រអនុ ែ តតា ប្ រ ករលោយសុ ែ ត្ថ ិ ភា ររំ ល ុ ត សូ ម លមប្ ល លរហទំ រ ័ រ ការអនុ ែ តតា តា មរទរញញា ត តា ិ តាមរយៈ
Procedure
1. Place the power button on the palm-rest and keyboard assembly and align the screw hole on the power button with the screw hole on
the palm-rest and keyboard assembly.
2. Replace the screw (M2.5x5) that secures the power button to the palm-rest and keyboard assembly.
3. Adhere the tape that secures the power button to the palm-rest and keyboard assembly.
4. Slide the power-button cable to the system board and close the latch to secure the cable.
50
ការលោះ និ ង ែំ ល េប្ ង សមាសភារនានា
មុ ន នឹ ង លធ្វ ប្ កា រលៅខាងក្ន ុ ង កុ ំ រ ្យ ទ ទ ័ រ ររស់ អ ្ន ក
។ រនា ទា រ់ រ ី ល ធ្វ ប្ កា រលៅខាងក្ន ុ ង កុ ំ រ ្យ ទ ទ ័ រ ររស់ អ ្ន ក សូ ម អនុ ែ តតា តា មការដណនាំ ល ៅក្ន ុ ង
www.dell.com/regulatory_compliance
រនា ទា រ់ រ ី ល ធ្វ ប្ កា រលៅខាងក្ន ុ ង
។