Indicator Lights - Remington Ultimate Series Manual

ENGLISH
PARTS
1. On/off switch
2. Head assembly
3. Individual flexing heads
4. Hairpocket
5. Pop-up trimmer
6. Battery indicator (red)
7. Charging indicator (green)
CHARGING YOUR APPLIANCE
1. Ensure the product is switched off.
2. Connect the charging adaptor to the product and then to the mains.
3. Charge for 4 hours when using for the first time. This first charge is important to the
shaver's battery life.

INDICATOR LIGHTS

Charge Level
Charging
Fully Charged
Battery charge is low
• Your head shaver cannot be used when it is charging.
• When empty, the battery should be charged for 4 hours for a full charge and will
provide up to 50 minutes of shaving time.
• To preserve the life of the battery do not charge the battery after each use. Best
practice is to use the shaver until the red battery indicator flashes and then recharge.
INSTRUCTIONS FOR USE
1. Hold the head shaver body in the palm of your hand. Press the on/off switch to turn the
head shaver on.
2. Press the cutting heads against your scalp. It is not necessary to press hard to shave.
Pressing hard does not cut closer and could increase irritation. The cutting head will
flex to follow the contours of your head.
3. Move the shaver slowly around your head. You may use linear or circular strokes,
whichever works best for your hair.
4. Use a hand held mirror to check the back of your head to confirm a complete and
thorough shave. You may also use your other hand to feel for complete and consistent
cutting.
4
8. Charger connector
Not shown:
• Charging adaptor
• Head guard
• Cleaning brush
• Travel pouch
Indicator
Green light will come on
Green light will go off
Red light will come on