Advertisement
Section 4: Maintenance and Lubrication
30364
Fill Plug
Level Plug
RTA Series
32
RTR12 & RTA12 Series (Serial No. 884765+) Rotary Tillers 311-883M
Table of Contents
30356
30357
Fill Plug
Level Plug
RTR Series
30358
Bearing On Right End Of Rotor Shaft
Type of Lubrication: Multi-Purpose
Quantity = As Required
Chaincase
IMPORTANT: Tiller should be level when checking
oil level in chaincase. Check oil level by removing
lower level plug. Oil should reach bottom of plug
hole. Remove fill plug and add recommended
lubrication as needed. Tighten both plugs when
done.
Type of Lubrication:
Shell Gadus S2 V220 00 flowable grease
Land Pride #821-045C (32oz. bottle)
Quantity: Gear Lube will run out of lower plug when full.
Gearbox
Check oil every 50 hours of operation by removing center
level plug at the rear of the gearbox, oil should come to
bottom of center plug hole. Add recommended gear lube
through fill plug hole until oil begins to flow out of oil level
plug hole. DO NOT OVERFILL!
Tighten all plugs when done.
Type of Lubrication: SAE 80-90W EP Oil
Quantity = Fill until oil begins to flow out of oil level plug
hole.
8
Hours
As
Required
50
Hours
11/19/19
Advertisement
