With Coffee Beans - SEVERIN KA4813 Operating Instructions Manual

CAUTION!
To avoid damaging the appliance only fill the water
tank with cold tap water.
Blooming function
TIP
In order to retain a more full-bodied coffee aroma,
the device is equipped with an blooming function.
The coffee grounds are moistened with hot water
before brewing. It can swell up, the coffee taste
becomes more intense.
GB
1. Press the " " button for 2 seconds. You will see "
flashing on the display..
2. Press the " " button.
→
: blooming function switched on
→
: blooming function switched off
→ Wait a few seconds. The most recent option displayed will be
applied.
TIP
Depending on the settings, the device will switch
off 0 to 60 minutes after the coffee is prepared or, if
no coffee is made, 1 minute after the last input. To
switch it on again, press the " " button.
26

5.1 With coffee beans

1. Remove the bean container lid
" and " "
2. Add no more than 200 g of coffee beans to the bean container
3. Replace and firmly press down the lid
4. Press the "OPEN" button
swing-out filter
5. Place the filter insert
6. Place a disposable coffee filter in the filter insert
7. Fit the filter ring
8. Close the swing-out filter
9. Remove the coffee jug
TIP
You can interrupt the brewing function at any time by
pressing the " " button. Water remains in the water
tank when you interrupt the brewing function. Empty
the water tank by removing the disposable coffee
filter or permanent filter from the filter insert, placing
the empty coffee jug on the hotplate and continuing
operation after pressing the " " button followed
by the " ".
.
15
CAUTION!
Do not use unroasted, caramelised or sugar-coated
coffee beans.
.
15
on the side of the appliance to open the
11
.
4
in the swing-out filter
3 4
TIP
You can also use the permanent filter
a disposable coffee filter.
onto the filter insert
.
1 3
.
4
.
5
.
14
.
.
3
instead of
2