Yamaha AW2816 Manual page 29

Saving Mixer Settings for a Song in an AW2816
In order for the mixer settings for a Song to be saved with the Song, they must be stored as a Scene
Memory.
NOTE: The steps involving 'Confirmation' prompts will not be necessary if the 'Store/Recall Confirmation'
options have been disabled in the 'UTILITIES: Prefer 1. page'.
Saving Mixer Settings:
1) Configure the AW2816 with ALL of the desired parameter settings for the beginning of the selected
Song.
2) Press the [SCENE] button in the 'AUTOMATION' section above the (DATA/JOG) dial.
3) Use the (DATA/JOG) dial to select an empty or blank Scene Memory location as indicated by a
title of ''[ NO DATA! ]''. Once selected, the Scene Memory location will begin blinking.
4) Press the [STORE] button. The 'TITLE EDIT' page will appear.
5) Name the Scene using the character template in the 'TITLE EDIT' page.
6) When completed, use the 'CURSOR' buttons to select 'OK', then press the [ENTER] button. The
new Scene will be saved AND associated with the current Song.
7) Repeat steps 1-6 to create additional scenes, or ''mixes'' of the Song.
NOTE: When a Song is recalled, the mixer settings from the previous Song will remain as the current
settings until a different Scene Memory is recalled.
26