Cisco Nexus 93360YC-FX2 Hardware Installation Manual page 31

Installing the Chassis
c) Repeat Step 3 to attach the other slider rail to the other side of the rack.
To make sure that the slider rails are at the same level, you should use a level tool, tape measure, or carefully count
the screw holes in the vertical mounting rails.
Step 4 Insert the switch into the rack and attach it as follows:
a) Holding the switch with both hands, position the switch onto the rack-mount brackets and carefully slide the chassis
into the rack (see the following figure).
Step 5 Insert the rack-mount retainer brackets
a) Align the retainer brackets to the front of the chassis, being careful not to damage anything on the front of the chassis
(see the following figure).
b) Repeat Step 5 to attach the other retainer bracket on other side of the chassis.
Installing the Switch using the NXK-ACC-RMK-2RU Rack-mount Kit
Cisco Nexus 93360YC-FX2 NX-OS Mode Switch Hardware Installation Guide
23