Siemens SIMATIC ET 200S Manual page 8

Properties
1.1 Digital electronic module 8DO DC24V/0.5 A (6ES7132-4BF00-0AA0)
2-wire connection
The following configuration example shows a two-wire connection with the electronic
modules 8DO DC24V. You require further terminals so that sufficient terminals are available
for the mass M connection when the TM-E15S26-A1 terminal modules are used. In the
example this is implemented by the add-on terminal TE-U120S4x10, which you can mount
as of a width of 120 mm (8 EMs). You can naturally also use other terminals for this
configuration (for example, ET 200S potential distribution module 4POTDIS).
①
②
③
④
⑤
⑥
8
Terminal module TM-P15S23-A0
Power module PM-E 24 VDC
Electronic modules 8DI DC24V
Terminal modules TM-E15S26-A1
Actuator in 2-wire connection
Add-on terminal TE-U120S4x10
Digital electronic module 8DO DC24V/0.5 A (6ES7132-4BF00-0AA0)
Manual, 10/2015, A5E01077385-AB