Zanussi ZWF 81443W User Manual page 13

Hide thumbs Also See for ZWF 81443W:
Table of Contents

Advertisement

Available languages

Available languages

STARTING A PROGRAMME WITH THE DELAY
START OPTION
1. Press the button Startuitstel/Départ différé
again and again until the display shows the
delay you want to set. The delay start indicator
comes on.
2. Press the button Start/Pauze Départ/Pause:
The door is locked and the indicator
on.
The appliance starts the countdown.
When the countdown is completed, the
programme starts automatically.
You can cancel or change the set of
the Startuitstel/Départ différé option
before you press the button Start/
Pauze Départ/Pause. After pressing
the button Start/Pauze Départ/Pause
you can only cancel the Startuitstel/
Départ différé option.
To cancel the Startuitstel/Départ différé option:
a. Press the button Start/Pauze Départ/
Pause to set the appliance to pause. The
indicator of button Start/Pauze Départ/
Pause flashes.
b. Press the button Startuitstel/Départ différé
until the display shows
Press the button Start/Pauze Départ/
Pause again to start the programme
immediately.
INTERRUPTING A PROGRAMME AND
CHANGING THE OPTIONS
You can change only some options before they
operate.
1. Press the button Start/Pauze Départ/Pause.
The indicator flashes.
2. Change the options.
3. Press the button Start/Pauze Départ/Pause
again.
The programme continues.
CANCELLING A RUNNING PROGRAMME
1. Turn the programme knob to position
cancel the programme and to deactivate the
appliance.
2. Turn the programme knob again to activate the
appliance. Now, you can set a new washing
programme.
OPENING THE DOOR
is
While a programme or the Startuitstel/Départ
différé operates, the appliance door is locked. The
indicator
To open the door during the first minutes of the
cycle or when the Startuitstel/Départ différé
operates:
1. Press the button Start/Pauze Départ/Pause to
2. Wait until the indicator
3. You can open the door.
4. Close the door and touch the button Start/
.
AT THE END OF THE PROGRAMME
The washing programme is completed, but
to
there is water in the drum:
Draining the water:
Before starting the new programme
the appliance could drain the water. In
this case, make sure that the detergent
is still in the detergent compartment, if
not fill the detergent again.
is on.
CAUTION! If the temperature and
level of the water in the drum are too
high and the drum still rotates, you
cannot open the door.
pause the appliance.
Pauze Départ/Pause again. The programme (or
the Startuitstel/Départ différé) continues.
The appliance stops automatically.
The acoustic signal operates (if it is activated).
In the display
comes on.
The indicator of the button Start/Pauze Départ/
Pause goes off.
The door lock indicator
Turn the programme knob to position
deactivate the appliance.
You can open the door.
Remove the laundry from the appliance. Make
sure that the drum is empty.
Close the water tap.
Keep the door and the detergent drawer ajar, to
prevent the mildew and odours.
The drum turns regularly to prevent the creases
in the laundry.
The indicator Spoelstop/Anti-froissage stays on
to remind you to drain the water.
The door lock indicator
of button Start/Pauze Départ/Pause is off. The
door stays locked.
You must drain the water to open the door.
goes off.
goes off.
to
is on. The indicator
13

Advertisement

Table of Contents
loading

Table of Contents