When setting the low seat position:
Insert the rear prong into the rear lower slot
on the rear carrier.
Low position:
Front upper prong
Front stay
Front
seat
Removing & Installing Body Components
Rear prong
Lower slot
2.
When setting the high seat position:
Insert the front lower prong into the front
stay.
When setting the low seat position:
Insert the front upper prong into the front
stay.
Push down on the center of the front seat
3.
until it locks in place.
Make sure that the seat is locked securely
in position by pulling it up lightly.
The seat locks automatically when
installed.Take care not to lock your key in the
compartment under the front seat.
Front Seat
u
111