Samsung MH FSBA Series Installation Manual page 21

Assigning address to indoor unit
1. Before installing the indoor unit, assign an address to the indoor unit according to the air conditioning system plan.
2. The address of the indoor unit is assigned by adjusting MAIN(SW02).
MH✴✴✴FSBA
MH✴✴✴FMBA
3. The MAIN address is for communication between the indoor unit and the outdoor unit. Therefore, you must set it to
operate the air conditioner properly.
4. It is required to set the RMC address if you install the wired remote control and/or the centralized control.
5. If you install optional accessories such as the wired remote control, centralized control, etc. see an appropriate installation
manual.
6. If an optional accessory is not installed, you do not have to set the RMC address. However, adjust K1 and K2 switches of
the SW04(SW05) DIP switch to "ON" position in this case.
20
FJM IDU-PH_Cassette type_IM_31595A-04_EN.indd 20
SW05 SW06 SW07
SW01 SW02 SW03 SW04
MAIN MAIN RMC RMC
SW02 MAIN SW04 RMC
SW05 SW06 SW07
2015-11-16 오후 4:52:23