5 Listen to radio
Note
•
Only FM radio reception is available on this unit.
Tune to a radio station
Tip
•
For optimal reception, fully extend and adjust the
position of the FM antenna.
•
Position the antenna as far as possible from TV, VCR or
other radiation source.
•
[STEREO] is the default setting for tuner mode.
•
In tuner mode, you can press OK /
between [STEREO] and [MONO] , and the unit
memorizes your setting even if you turn off the unit or
turn to other sources.
1
Press SOURCE repeatedly to select FM
mode.
2
Press and hold TUNE+ / TUNE- for more
than 2 seconds.
» The radio tunes to next station with
strong reception automatically.
3
Repeat step 2 to tune to more stations.
•
To tune to a weak station, press
TUNE+ / TUNE- repeatedly until you
nd optimal reception.
Program radio stations
Radio station preset allows you to save radio
stations, and quickly tune to a favorite station.
DFU_AJ7050D_A5_CS5.indd 32
•
The preset list can store up to 20 stations.
•
If the preset list is fully occupied, [PROGRAM FULL]
(program full) scrolls on the screen.
•
When you save a radio station to a position that has
already been occupied, the original radio station will
be replaced.
Program radio stations manually
1. Press SOURCE repeatedly to enter the FM
mode.
2. Press TUNE+ / TUNE- to tune to a radio
station.
3. Press PROG/SCAN .
» A position number ashes.
to toggle
4. Press OK to save current radio station to the
selected position.
•
Press PRESET + / PRESET - to change the position to
save a radio station.
Program radio stations automatically
1
Press SOURCE repeatedly to enter the
FM mode.
2
Press and hold PROG/SCAN .
» The screen displays [AUTO] (auto);
» The unit starts to scan for all available
3
Wait until the auto scan nishes.
» The rst station in the preset list
Select a preset radio station
1
Press
32
Note
Tip
radio stations automatically, and stores
them to the preset list.
broadcasts automatically.
/
to select a preset number.
13/11/05 18:32