LG MULTI V 5 ARUM160LTE5 Installation Manual page 3

• Do not install, remove, or re-install the
unit by yourself (customer).
- There is risk of fire, electric shock,
explosion, or injury.
• Do not store or use flammable gas or
combustibles near the air conditioner.
- There is risk of fire or failure of product.
• Use the correctly rated breaker or fuse.
- There is risk of fire or electric shock.
• Prepare for strong wind or earthquake
and install the unit at the specified place.
- Improper installation may cause the unit
to topple and result in injury.
• Do not install the product on a defective
installation stand.
- It may cause injury, accident, or damage
to the product.
• Use a vacuum pump or Inert(nitrogen)
gas when doing leakage test or air purge.
Do not compress air or Oxygen and do
not use Flammable gases. Otherwise, it
may cause fire or explosion.
- There is the risk of death, injury, fire or
explosion.
• When installing and moving the air
conditioner to another site, do not charge
it with a different refrigerant from the
refrigerant specified on the unit.
- If a different refrigerant or air is mixed
with the original refrigerant, the
refrigerant cycle may malfunction and
the unit may be damaged.
• Do not reconstruct to change the settings
of the protection devices.
- If the pressure switch, thermal switch,
or other protection device is shorted and
operated forcibly, or parts other than
those specified by LGE are used, fire or
explosion may result.
• Ventilate before operating air conditioner
when gas leaked out.
- It may cause explosion, fire, and burn.
• Securely install the cover of control box
and the panel.
- If the cover and panel are not installed
securely, dust or water may enter the
outdoor unit and fire or electric shock
may result.
• If the air conditioner is installed in a small
room, measures must be taken to
prevent the refrigerant concentration
from exceeding the safety limit when the
refrigerant leaks.
- Consult the dealer regarding the
appropriate measures to prevent the
safety limit from being exceeded.
Should the refrigerant leak and cause
the safety limit to be exceeded, harzards
due to lack of oxygen in the room could
result.
• This equipment shall be provided with a
supply conductor complying with the
national regulation.
• If the supply cord is damaged, it must be
replaced by the manufacturer, its service
agent or similarly qualified persons in
order to avoid a hazrd.
Operation
• Do not damage or use an unspecified
power cord.
- There is risk of fire, electric shock,
explosion, or injury.
• Use a dedicated outlet for this appliance.
- There is risk of fire or electrical shock.
• Be cautious that water could not enter
the product.
- There is risk of fire, electric shock, or
product damage.
3