Timer Recording; Location Of Controls - Panasonic PV-V4603 Operating Instructions Manual

Timer Recording

Timer Recording
1
1) Press PROG*.
2) Press to display program screen.
2
1) Set record DATE,
TIMER PROG. LIST
DATE START STOP CH
press to select:
13 SAT --:-- --:-- --
TODAY
1~31= one time,
SLP
SELECT START DATE
or DAILY= MON~ FRI,
SELECT : SET:
or WEEKLY= same time
END : PROG
each week and press .
2) Set remaining items,
press to select and
press to set START/ STOP times, CH (channel) or
LINE input (p. 9 of Advanced Operations book), and
tape speed (p. 3).
Press PROG to end programming.
3
To Enter More Programs
TIMER PROG. L I ST
DT START STOP CH SPD
Press to select and
13 2 : 00 P 3 : 20P 02 SLP
-- -- : -- -- : -- -- --
-- -- : -- -- : -- -- --
press to set an unused program.
-- -- : -- -- : -- -- --
Then repeat step 2.
CANCEL : ADD / DLT
SELECT : SET :
EXIT : PROG Or, press PROG to exit.
4
Press POWER off to set the timer recording. ("TIMER" lights on Multi Function Display.)
Review, Replace, or Clear Program
(Recording is not in progress)
a
1) Press PROG.
2) Press to select LIST.
b
Press to select
TIMER PROG. L I ST
DT START STOP CH SPD
desired program.
7 9 : 00A 12 : 00A 08 SP
8 10 : 00P 12 : 00P 02 SP
10 8 : 00P 9 : 00P 10 SP
SU 9 : 00P 10 : 00P L1 LP
CANCEL : ADD / DLT
SELECT : SET :
EXIT : PROG
c
To Replace program...
1) Press to display.
TIMER PROG. LIST
DATE START STOP CH
7 SUN 9:00A 12:00A 08
2) Repeat Step 2
TODAY
(above) to set new
SP
SELECT START DATE
programs.
SELECT : SET:
END : PROG
or
To Clear program...
Press ADD/DLT.
TIMER PROG. L I ST
DT START STOP CH SPD
-- -- : -- -- : -- -- --
8 10 : 00P 12 : 00P 02 SP
10 8 : 00P 9 : 00P 10 SP
SU 9 : 00P 10 : 00P L1 LP
CANCEL : ADD / DLT
SELECT : SET :
EXIT : PROG
d
Press PROG to end the programming.
Notes
• If you are using a Cable Box, VCR Timer Programming Channel (Step 2 above) must
be set to the Cable Box output channel and your Cable Box must be manually set to
the desired channel. The Cable Box must be left on.
• If a power interruption occurs while programming the timer, the timer program(s) may be
canceled. If "TIMER PROGRAMS WERE LOST DUE TO POWER INTERRUPTION" appears
on-screen, please re-enter the timer programs.
Important notes when using DSS receiver
• When recording programs via DSS receiver, DSS receiver must be left on.
• When recording programs via an antenna or cable, DSS receiver must be turned off.
Example
Today
8 9 31 1 2
SELECT / Selection Order
7
WEEKLY WEEKLY WEEKLY
(SAT) (MON)
Cancel a Timer Recording
(Recording is in progress)
Press POWER and then STOP within 10
seconds to cancel the Timer Recording.
(The TIMER indicator goes out on Multi
Function Display.)
- 6 -

Location of Controls

Remote Control Buttons
EJECT
(Ejects tape)
POWER
(Turns VCR off/on)
VCR (mode)
6
(Enables VCR functions)
VCR/TV
DAILY
(For TV or VCR mode)
PLAY (Plays a tape)/
(SUN)
FAST FORWARD/SEARCH
(Fast forwards tape/ forward visual search)
REWIND/SEARCH
(Rewinds tape/ reverse visual search)
STOP
(Stops tape)
Remote keys
PLAY, STOP, REW, and FF
function as operation
keys when menus are displayed.
ACTION
(Displays menu)
COUNTER RESET
(Resets counter to zero)
PAUSE/SLOW
(Displays still, frame by frame,
or slow motion picture)
SAP/Hi-Fi
(Selects audio mode for play or
record)
VOLUME UP/DOWN
(Adjusts TV volume)
SHUTTLE Ring
(Variable speed search)
Tower Universal Shuttle Remote Control
EJECT button: Press to eject tape. EJECT is not available during recording.
Front View of the VCR
POWER
Video
Input
Connector
Audio Input
CHANNEL UP/DOWN
Connector
TRACKING/ V-LOCK
(L/R)
*Important: If a remote control button does not work when pressed,
press the VCR button on the remote and try the button again.
(Enables DSS/CABLE functions)
(Displays Timer Program screen)
( Starts COMMERCIAL SKIP/ Zero Search
(Set search system /Tunes TV channel)
(Selects channel/ reduces picture
noise during Play and Slow mode)
Cassette Compartment STOP/EJECT
Remote RECORD
Sensor
Multi Function Display
- 7 -
DISPLAY
(Displays VCR status)
TV (mode)
(Enables TV functions)
DSS/CABLE mode
INPUT
(For LINE or channel)
PROGRAM
NUMBER Keys
(Selects channel directly)
ADD/DELETE
(Adds or deletes a channel)
COMMERCIAL SKIP/
ZERO SEARCH
)
TAPE POSITION
(Locates tape position)
SEARCH/ ENTER
SPEED
(Changes tape speed)
RECORD
(Records a program, etc.)
CHANNEL /
TRACKING/ V-LOCK
PLAY
FAST
FORWARD/
SEARCH
REWIND/
SEARCH