REF 54_
8.6.2.
112
Feeder Terminal
Technical Reference Manual, General
Function blocks
• MEVO1A, MEVO1B, alternative measuring mode (DFT) added
• FREQ1ST_, maximum Operation time extended to 300 s instead of 120 s
Table 8.6.1-1
New protection functions
Function
Description
FLOC
Fault locator
Table 8.6.1-2
New power quality functions
Function
Description
PQVO3Sd
Short duration voltage variations
For further information about the changes above, refer to the function block
descriptions on the CD-ROM Technical Descriptions of Functions.
Protocols & communication
• DNP 3.0 and Modbus support with RER 123 Bus Connection Module
• SPA support with RER 133
• Faster communication with SPA-ZC 302
• Faster communication with SPA-ZC 400 with limited GOOSE messages
Tools
• PQVO3Sd support added to Fault and Power Quality Reports in LIB 510
• Transducer Linearization Tool in CAP 505
Configuration, setting and SA system tools
The following tool versions are needed to support the new functions and features of
the Release 3.5 revisions of REF 54_:
• CAP 505 Relay Product Engineering Tools; CAP 505 v. 2.3.0-6
• CAP 501 Relay Setting Tools; CAP 501 v. 2.3.0-6
• LNT 505 LON Network Tool; LNT 505 v. 1.1.1-1
• MicroSCADA Pro Application Library LIB 510 *4.2
• REF 541/543/545 Connectivity package v. 1.2
• Communication Engineering Tool for COM610, SPA-ZC 40x or MicroSCADA
Pro SYS 600 and COM 500
• SCL Importer in MicroSCADA Pro SYS 600 and COM 500
1MRS750527-MUM