Toshiba RAV-GP1101AT8-E Service Manual page 90

No. Part name
Discharge 1. Detachment
2
port cabinet
2. Attachment
Procedure
1) Carry out the operation in 1. of
2) Remove the screws fixing the inverter assembly,
the discharge port cabinet and the partition board.
(ST1T M4 × 8, 4 pcs.)
3) Remove the screws for the discharge port cabinet
and the bottom plate.
(Hexagonal screw M4 × 10, 2 pcs.)
4) Remove screw for the discharge port cabinet and
heat exchanger. (ST1T M4 × 8, 1 pc.)
5) Remove screw for the discharge port cabinet and
the motor base. (ST1T M4 × 8, 2 pcs.)
6) Remove screws for the discharge port cabinet
and the fin guard.
(Hexagonal screw M4 × 10, 2 pcs.)
1) Attach the discharge port cabinet and end board
of heat exchanger and fix with a screw.
(ST1T M4 × 8, 1 pc.)
2) Mount other removed screws into original
positions.
above.
– 90 –
Remarks
Heat exchanger Motor base
Discharge Discharge Discharge
port cabinet port cabinet port cabinet
Fin guard Bottom plate