Timer Recording - Panasonic PV-D4752 Operating Instructions Manual

Timer Recording

Ready Checklist
All connections are made (pp. 12 ~ 15).
TV and DECK are plugged in.
Clock set correctly.
Tape has rec.tab. (p. 6)
Remote is in VCR mode. (Press VCR.)
Sufficient tape remaining for recording time.
1
Press PROG*
to display Program.
2
DATE START STOP
13 SUN --:-- --:-- --
TODAY
- - - - - - - - -- - - - - - - -- - - - - - -
SELE CT START DATE SE
SELECT :
SET : SET
END : PROG
Example
Today
31 1 12
14
WEEKLY
SELECT /
13
Selection Order
WEEKLY
(SAT)
3
DT START STOP CH SPD
13 10 : 00 P 12 : 00 P 02
-- -- : -- -- : -- --
-- -- : -- -- : -- --
-- -- : -- -- : -- --
CANCEL : ADD / DLT
SELECT 1-8 :
ENTER : SET
EXIT : PROG
For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : consumerproducts@panasonic.com
24
1) To set record DATE,
CH
press
SLP
1~31= one time, or
DAILY= MON~ FRI, or
WEEKLY= same time
each week and
press SET.
• See selection order left.
2) To set remaining items,
DAILY
press
to select and
(SUN)
press SET
WEEKLY
to set START/ STOP times,
(MON)
CH(channel) or LINE input
(p. 35), and tape speed
(SP, LP, SLP).
Press PROG
to end programming.
To Enter More Programs,
SP
press
--
--
to select and
--
press SET
to set an unused program
number, and then repeat
step 2.
Or
Press PROG
to exit.
• The "Timer" Indicator lights up on DECK.
• You can do Timer Recording with the power or off.
• "TIMER REC WILL START SOON" appears on-screen for 2 minutes
before Timer Recording starts. If DECK is in DVD mode, no message
appears, but the VCR REC Indicator, the VCR mode indicator and
"REC" will flash on Multi function Display.
to select:
VCR mode Indicator
VCR REC Indicator
Multi Function Display
VCR Hi-Fi TIMER
VCR
•
A
VCR REC
M
•
TIMER Indicator
POWER
ADD/DLT
PROG
SELECT
SET
DVD
•
ANGLE
•