Boston Acoustics TVee One Owner's Manual page 6

Coaxial Digital In
If your television lacks an optical digital out it will probably include a coaxial digital out (if your television includes both, give
preference to the optical out). Use an "RCA"-type cable (or equivalent) to connect this to TVee One's Coaxial Digital In. Other
components connected to the television in the same way, such as a DVD/Blu-ray player or cable/satellite tuner,
will automatically play through TVee One when selected by the television's remote.
Television rear panel
DIGITAL AUDIO
COAXIAL OUT
Analog In (1/8-inch [3.5mm] mini plug (analog audio)
If your television lacks both optical digital and coaxial digital output, connect its analog stereo audio output here using the
supplied 1/8-inch (3.5mm) stereo cable (or equivalent); if this output is in the form of dual RCA jacks (typically, red and white),
use the supplied adapter as well. If no other audio output is available, connect the set's headphone out to the analog input
using the supplied cable or equivalent.
Television rear panel
AUDIO
OUTPUT
RCA to 3.5mm
Adapter
Important Note: Input Sensitivity (Analog Input Only)
The normal setting for this is "0 dB. " In rare cases a television' s analog audio output may be too strong. Should you hear dis-
torted, harsh, or "buzzy" sound from TVee One via its analog stereo input, adjust the rear panel Input Level slide-switch. There
are three settings: try the middle position first(-6 dB), the -12 dB setting only if you continue to hear distortion.
If you connect multiple inputs to TVee One the soundbar automatically selects the one with the highest priority. For example,
if optical and analog ins are both connected with live signal, optical will play through the soundbar. If the optical source
subsequently shuts off, the analog signal will be heard; should the optical source power back up TVee One automatically
switches back to its optical in.
6
TVee One rear panel
TVee One rear panel