HoMedics SoundSpa SS-3000-2EU Instruction Manual page 5

SS-3000-2EU_IB.qxd:Layout 1
Using the Picture Projection
NOTE: The projector door must be completely closed, pushed all the way up, in
order for the picture projector to function (Fig 6).
1. Turn on the picture projection on by pressing the PROJECTION ON/OFF
button (Fig 3).
2. To adjust the brightness of the projection, turn the HI/LO knob (Fig 5) to your
desired level.
3. The angle of the projector can be adjusted by angling forward up to 90°
4. When finished using the picture projection you may turn it off by pressing the
PROJECTION ON/OFF button.
NOTE: SOUNDS and PROJECTION are independent functions. You can use one at
a time or both combined.
FIGURE 5
HIGH/LO
KNOB
FRONT
OF UNIT
23/7/09 14:35
BACK OF UNIT
5
Page 5
FIGURE 6
PROJECTOR DOOR
UP FOR PROJECTION
DOWN FOR DISC
UP FOR PROJECTION
DOWN FOR DISC
DISC STORAGE SLOTS
JACK