Advertisement
The Display counts down the time
d
to show how much time is left in the
0Wf-l
first cycle.
When the cooklng ttme ends, "End"
will show on the Display and 4 beeps
will sound. (You can stop the beeplng
by opening the door or by touchtng
CANCEL.) "End" will remaln on the Dls-
play and a reminder tone will sound
every 30 seconds until the door Is
opened or CANCEL is touched. The
Display will then show the time of day
Changlng
the cooklng
time
Cooklng tlme can be changed
any tlme before touching START or during the cycle:
1. Touch COOK 1.
2. Touch numbers for the new ttme.
3. Touch START.
Cook 1 will continue cooking for the new time.
lower cook powers
For best results, some recipes call for lower Cook Powers. The lower the Cook Power, the
slower the cooking. Each Number Pad also stands for a different percentage
of Cook Power
Many recipes In your MICRO MENUS@ Cookbook tell you, by number, which Cook Power to
use. Recipes In other books and magazines may tell you by name (HI, MED, LO, etc.) or
percentage
(lo%, 50%, 80%, etc.].
The followlng chart glves the percentage
of Cook Power each Number Pad stands for, and
Cook Power name usually used.
automatic
100% of full power HIGH
9 = 90% of full power
8 = 80% of full power
7 = 70% of full power MEPHIGH
6 = 60% of full power
5 = 50% of full power MED
4 = 40% of full power
3 = 30% of full power
MED-LOW
2 = 20% of full power
1 = lO%of full power
LOW
0 = TIMER (fan and light will be off)
DO THIS...
1.
Put tood In the oven and close
the door.
THIS HAPPENS...
The COOK 1 Indicator Light will
come on and the Display will show
four 0's.
3. Touch Number Pads tor the
cooklng tlme you want.
The Display will show the numbers
Advertisement
