Advertisement
Any new ttme sethng made while BUICK DEFROST Is operating
will continue the
dehostlng
at only 20% of full power.
The best tlme to change the setting is near the end of the QUICK DEFROST Cycle.
l
Open the door.
l
Check the food with long-tined fork; if center area is hard frozen, set additional
time.
Remember that standlng ttme Is necessary
to complete
defrosttng.
l
Close the door and touch START To continue the cycle if no additional
time is needed.
OR...
l
Touch in new Instructions for additional
defrosting time.
Cooking in more than one cycle at one or more cook powers
For best results, some recipes call for one Cook Power for certain length of time, and another
Cook Power for another length of time. Your oven can be set to change from one to
another
automatlcally
DO THIS...
THIS HAPPENS...
1.
Put food in the oven and close
the door.
The COOK 1 Indicator Light
will come on and the Display will
show four 0's.
3. Touch Number Pads for the
cooklng time you want in the
first cycle.
'Ihe Display will show the numbers
you touched in the order you
touched
them. This example shows
3 minutes, 25 seconds.
-
. .
Ma
'.
-
4.
Touch COOK POWER. (If you
want the high Cook Power, skip
to step 6.)
The COOK POWER Indicator Light will
come on and the Display will show
"P-HI". This shows the oven is pre-
programmed
to cook at full IHIGH)
power.
I.
m
.
5. Touch a Number Pad for the
Cook Power you want In the first
cycle.
The Display will show what you
touched. This example shows you
touched Number Pad 6 for 60% of
full power.
12
Advertisement
