Whirlpool MT1066XB Use And Care Manual page 37

tf You Need Assistance
Or Sewice
This section is designed to help you save the cost of a service call. Part 1 of this section
outlines possible problems, their causes, and actions you can take to solve each problem.
Parts 2 and 3 tell you what to do if you still need assistance or service. When calling our
Consumer Assistance Center for help or calling for service, please provide a detailed descrip-
tion of the problem, your appliance's complete model and serial numbers and the purchase
date. (See page 2.) This information will help us respond properly to your request.
1. Before calling for assistance . . .
Performance problems often result from little things you can find and fix without tools of any
kind. Please check the chart below for problems you can fix. lt could save you the cost of a
service call.
PROBLEM
POSSIBLE CAUSE SOLUTION
Nothing will
The power supply cord is not Plug power supply cord into
a
live
operate
plugged into a live circuit with circuit with the proper voltage. (See
the proper voltage. pages 7 and 9.)
A household fuse has blown or Replace household fuse or reset
a circuit breaker has tripped. circuit breaker.
The electric company has Check electrii company for
a
power
experienced a power failure.
failure.
The microwave The door is not firmly closed Firmly close and latch door.
oven will not
and latched.
run
You did not touch START/ Touch START/ENTER.
ENTER.
You did not follow directions Check instructions for the function
exactly. you are operating.
An operation that was pro-
Touch OFF/CANCEL to cancel
grammed earlier is still running. previous programming.
Turntable will
Turntable is not correctly in Make sure turntable is correct-side up
not turn
place. and is sitting securely on center shaft.
Support is not operating
Remove turntable and restart oven. If
correctly. turntable support does not move, call
an authorized Whirlpool service techni-
cian for repair. Cooking without the
turntable can give you poor results.
continued on next
page
37