Siemens DMS8000 MP4 Series Installation, Configuration And Operations Manual page 5

Introduction
i
Building Technologies
Fire Safety & Security Products
Operational and safety regulations
Before beginning work on the DMS8000 systems, you must have read and under-
stood the related documents, in particular the Safety Regulations included in the In-
stallation, Configuration, and Commissioning manual (ICC) for each specific product.
Liability disclaimer for damage or injuries
Before products are delivered, they are tested to ensure they function correctly
when used properly. Siemens disclaims all liability for damage or injuries caused
by the incorrect application of the instructions, or the disregard of danger adviso-
ries. This disclaimer applies in particular to personal injuries or damage caused by:
– Improper and/or incorrect use.
– Disregard of safety instructions in the documentation or on the product.
– Poor maintenance or a lack of maintenance.
We have checked the contents of this manual for agreement with the hardware and
software described. Since deviations cannot be precluded entirely, we cannot
guarantee full agreement. However, the data in this manual are reviewed regularly
and any necessary corrections included in subsequent editions. Suggestions for
improvement are welcome.
Modification index
Version
A6V10067792_a_en
A6V10067792_a_en
A6V10067792_a_en
009424_b_en
048_DMS_MM8000_GEUTEBRUECK_Add-On_MP4.20_A6V10067796_a_en
Date Notes
06.2009 Corresponds with DMS8000 MP4.20
06.2008 Corresponds with DMS8000 MP4.15
06.2007 Corresponds with DMS8000 MP4.10
06.2006 Corresponds with DMS8000 MP3.20
3
06.2009