Video Drivers; Video Components - Siemens DMS8000 MP4 Series Connectivity Manual

3.3

Video Drivers

3.4

Video components

Building Technologies
Fire Safety & Security Products
The VNM can support the driver required to handle the network communication
with NICE/RIVER units. To add the driver to your project, proceed as follows:
1. Select the VNM node.
2. In the toolbar, click the icon corresponding to the NR driver (Fig. 3):
Fig. 3 Video drivers
A Select this icon to add the TELSCAN driver
B Select this icon to add the SISTORE driver
C Select this icon to add the NICE/RIVER driver
In small system, the Video Driver is installed on the MM8000 server. Large sys-
tems may include FEP stations with additional Video Drivers that can distribute the
traffic load. In the FEP station, the IP address must be configured:
1. Select the Video Driver node and then the Node tab.
2. In the Server Settings section, enter the FEP IP address in the Video LAN.
The Video menu of the Composer button bar on the left hand side includes the
available video component. Fig. 4 illustrates the menu options and the correspond-
ing components.
A
B
C
Fig. 4 CCTV components menu
A Select this icon to add a Camera folder
B Select this icon to add a Monitor folder
C Select this icon to add a NICE ( or RIVER) Digital Video Recorder
DMS8000 Video Connectivity Configuration Guide – NICE Add-on
7
06.2009