Download Print this page

GE WMK-20 Manual page 7

Advertisement

red button on the side of the
adapter. At the end of the wash
cycle turn off faucets, press red
button again to relieve pressure
and eliminate splashing. Do not
disconnect hose coupler until
pressure is relieved.
Set
wash
temperature at faucet.
Washer drains into sink. Be sure
sink drain is open to prevent
overflowing. Blend hot and cold
water in equal parts for WARM
WASH. After wash agitation has
started, change faucet settings for
your
rinse
water temperature. Be
sure to plug washer into a properly-
grounded three-prong receptacle.
See your Installation Instructions.
B Push cycle Selector in and turn
clockwise to your selected wash
cycle.
Pull Cycle Selector out to start
the cycle. If you wish to change
cycle setting after washer has
started, push Cycle Selector in
and wait for washer to stop. Then
reset to the new position. Setting
can be changed at any time during
the cycle.
Hwv
to
soak h 'wxnr washer
Set WASH/RINSE TEMPERATURE
at WARM/WARM (MANUAL) and
adjust faucets for desired soak
temperature, Add detergent or
soak agent, Turn Cycle Selector to
desired cycle. Start the washer.
After washer fills and begins to
agitate, push in the Cycle Selector
to stop washer Allow to soak for
as long as desired. After desired
soak, turn to the last Spin. Pull
out the Cycle Selector to compiete
the cycle.
controls
setting
(hide
Some adjustment to these recommendations may be desirable depending on your particular washing conditions.
Cottons & Linens
Permanent Press
Polyester Knits
Synthetics & Blends
Work clothes,
Work clothes,
Fabric
dungarees, etc.
dungarees, etc.
White or
Bright
Heavy or
Normal or
Heavy or
Normal or
with heavy soil
with normal soil
Colorfast
Colors
Oily Soil
Light Soil
oily Soil
Light Soil
Wash/Rinse
Hot/Cold
Hot/Cold or
Temperature*
Warm/Cold
~a;$:o:
Cold/Cold
Hot/Cold
Warm/Cold
Warm/Cold
Warm/Cold
Cycie
Regu!ar
Regular
Regular
Regular
Perm. Press Perm, Press Delicate
Delicate
Cycle Selector
,5
Setting
15
15
10
12
8
Start
Start
*For portable, set at Warm/Warm (Manual) and leave it there.

Advertisement

loading

This manual is also suitable for:

Dsr-40Wpp-50Wwp1160bWwp1170bDdp1260bDdp1270b