Advertisement
2. Set the throttle control in the stop position.
Introduction
WARNING: Read and understand the safety
chapter before you do maintenance on the
product.
General product maintenance
Make sure that there are no fuel or oil leaks.
Clean the product.
Make sure that nuts and screws are tightened.
Examine the throttle control for damage.
Make sure that the throttle control can move smoothly.
Lubricate the throttle control and the engine throttle wire.
Do a check of the oil level in the rammer leg.
Replace the oil in the rammer leg.
Tighten the bolts on the rammer shoe.
Engine maintenance
Do a check of the fuel level and the engine oil level.
Clean or replace the air filter.
Clean and examine the cooling fins of the engine.
Replace the engine oil.
Replace the air filter.
Adjust the engine valve clearance.
Adjust the valve head clearance for the air intake and the
exhaust valves.
1167 - 003 - 09.03.2020
Maintenance
Maintenance schedule
* = General maintenance done by the operator. The
instructions are not given in this operator's manual.
X = The instructions are given in this operator's manual.
O = Refer to the engine manual for instructions.
Before use,
each 10 h
*
X
*
*
*
X
Before use,
each 10 h
X
X
O
After the
Weekly,
first 20 h
each 100 h
X
X
X
X
After the
Weekly,
first 20 h
each 100 h
X
X
X
O
Yearly, each
500 h
X
X
Yearly, each
500 h
O
X
X
O
9
Hide quick links:
Advertisement
