Siemens SIMATIC HawkEye 1600T Series Manual page 72

Appendix E
Updating Firmware on 1600T Cameras
Siemens HawkEye Smart Camera
400MHz 16MB Flash 64MB RAM
-----------------------------
Name: HawkEyeE1000E
Static IP: 161.218.121.183
Network Mask: 255.255.255.0
Gateway: 0.0.0.0
DHCP: 0
MAC Address: 00:60:33:e1:12:34
1. Modify User Parameters
2. Reset User Account
3. Exit to Application
>>
Type adv and press the Enter key.
4.
The advanced menu is displayed:
Siemens Advanced Options Menu
Diag Monitor V 1.01.00
------------------------------
dm
.
.
.
x
.
.
.
help
>>
Type x and press the Enter key.
5.
From the Transfer menu, select Send File....
6.
The Send File dialog box is displayed, as shown in Figure E–3.
E-4
Display Menu
File Transfer
Help
SIMATIC HawkEye™ 1600T Smart Camera Guide Rev. 1E, Nov 2007