Siemens SIMATIC HawkEye 1600T Series Manual page 45

TABLE A–2.
6 SENSOR
7 SENSOR
8 Power Return
Shell
Notes:
Non-isolated utility power for sensor and/or opto current loops.
1.
Bipolar isolated camera sensor trigger:
2.
–
–
–
Bipolar isolated output switch, Ron = 35 ohm max., Ion < 50ma.,
3.
Voff < ±50VDC, 60VAC isolation (short circuit protected: 160-240 ma pk.).
Common wire for Out1, Out2, and Out3 Opto-Isolated outputs.
4.
Total output current for all opto outputs must not exceed 150ma.
5.
Rev. 1E, Nov 2007
Power & Primary I/O Connector Signals (Continued)
In
In
Common
Logic 0: 0 to 5V
Logic 1: 15 to 30V
Rin: 18k Ohms
SIMATIC HawkEye™ 1600T Smart Camera Guide
HawkEyeTM 1600T Connectors
S/W Programmable Trigger
S/W Programmable Trigger
DC Ground
2
2
1
A
A-3