Advertisement
Section 6: Specifications & Capacities
Mower Model No
Overall width
Overall Length without hitch plate
Tire-to-tire width:
Overall Height
Drive Tires
Front Tires
Fuel Capacities
Steering Type
Twin Lever Steering Controls
Steering Turning Radius
Brake Service
Park Brake Type
Ground Speed
Motor Drive
Wheel Drive
Safety Features
Seat Options
Mainframe Construction
Drive Motor Mount
Front Caster Wheels
Front Caster Forks
Deck Thickness
Box-Section Reinforced Front Edge
Deck Trim Edges
Deck Housing Depth
Deck Lift
Hand Operated Controls
Indicators
Cup Holder
Cutting Height Adjustments
Mowing Blades
Blade Tip Speed
Blade Drive
Blade Spindles
Deck Suspension
Anti-Scalp Rollers
50
ZXT54 & ZXT60 Pro Series Zero Turning Radius Mowers Riding Mowers 357-271M
Table of Contents
ZXT Pro (General Specifications)
ZXT54
55 3/8"
48" to top of seat back and 70 1/2" to top of ROPS
13 x 5 - 6, Ribbed tread with roller bearings
Hydrostatic Twin lever steering provides independent control of each drive wheel.
Speed, forward, reverse, brake, and turns.
True zero degree. Turns with counter-rotating independent drive wheels.
Manual activated over-center lever to wet disc brake.
Single V-belt with electric clutch and spring tension idler pulley.
High torque piston type planetary reduction motors
Electric logic-control system governs blade engagement, forward & reverse motion,
engine starting & running, and parking brake functions.
Deluxe cushion seat with arm rests or
molded vinyl comfort suspension seat with arm rest.
Fabricated from 3/16" steel plate.
Free turning with greasable roller bearings.
11 Gauge decks with 11 gauge doubler plate
and 1/4" reinforcement plate at spindle housing mounts
Solid 1" x 3/8" steel bars for reinforced impact area
5 1/8" deep, (room for high-capacity mowing)
Foot-operated deck height adjustment with locking pin for setting height.
Ignition switch, throttle lever, control levers, park brake, blade engagement switch,
choke knob and Fuel Tank Selector Valve.
Engine warning light and hour meter for engine run time.
Two cup holders molded into the left side fuel tank.
Accommodates nearly any cup size.
Height adjustment in 1/4" increments from 1" to 5".
3 Heavy-duty, heat-treated, high-lift steel blades
.25" x 2 1/2" x 18.8"
18,515 FPM
Single B-Section belt drive to all three spindles. Spring tension idler pulleys.
Machined ductile iron housing, 1" diameter high carbon steel shafts
Four point suspension from frame by mechanical linkage with counter balance springs.
4 Anti-scalp rollers to improve flotation in rolling and uneven terrain.
83"
49"
24 x 10.5 - 12 Turf Tread
12 US GAL
Hydrostatic dynamic braking.
Forward: 0-11 MPH
Reverse: 0-5.5 MPH
Welded steel
5/16" steel.
11 ga. thick
.25" x 2 1/2" x 20.9"
and greasable ball bearings.
Land Pride
ZXT60
61 3/4"
18,700 FPM
2/10/09
Advertisement
