Repair Instructions; Dismantling The Engine - Husqvarna M105-85F Workshop Manual

Dismantling the Engine

Pull up the lever for engaging the blades.
Remove the bonnet.
IMPORTANT!
Hold the battery cable screws in place so that the
electrodes are not strained.
Loosen the battery strap and detach the cable connections.
Remove the cable connecting the starter relay to the starter.
Separate the connector.
Remove the side plates.
Loosen the screws. Twist out the back of the plate 45°. Remove
the front edge of the plate.
9 – English

REPAIR INSTRUCTIONS

Loosen the cable bracket from the engine.
Remove the fuel tank, see "Fuel Tank".
Remove the clip holding the throttle and choke cables. Release
the cable from its mounting.
Remove the plate over the engine by loosening the four screws in
the frame, two on each side. The engine can be removed without
lifting off the plate.