3.6.3
PE Over Ride Function
(a) When the SELECT switch is depressed after detection of PE and following printing, the printer is
deselected, and print data of one line in the buffer is printed out and then returns to DESELECT
status again.
3.6.4 Print Stop Function in Case of Emergency
If the LF switch is kept depressed until completion of one line printing after the SEL switch is pressed
to deselect the printer, the printer stops without printing out the remaining data in the data buffer.
To print out the remnant data, press the SEL switch to select the printer.
3.6.5
Received Data Hexadecimal Print Out Function
(a) When printer power is turned on while depressing the LF switch, data received from the host
computer is printed out in hexadecimal.
(b) The hexadecimal print out mode is cleared when the printer power is turned off.
-18-